Volume 2 Issue 3
Apr.  2022
Turn off MathJax
Article Contents
Dong WANG, Hongrui CAO. A comprehensive review on crack modeling and detection methods of aero-engine disks[J]. Journal of Advanced Manufacturing Science and Technology , 2022, 2(3): 2022012. doi: 10.51393/j.jamst.2022012
Citation: Dong WANG, Hongrui CAO. A comprehensive review on crack modeling and detection methods of aero-engine disks[J]. Journal of Advanced Manufacturing Science and Technology , 2022, 2(3): 2022012. doi: 10.51393/j.jamst.2022012

A comprehensive review on crack modeling and detection methods of aero-engine disks

doi: 10.51393/j.jamst.2022012

The authors gratefully acknowledge the support of the National Natural Science Foundation of China (No. 51922084).

  • Received Date: 2022-01-18
  • Accepted Date: 2022-03-16
  • Rev Recd Date: 2022-02-20
  • Available Online: 2022-03-30
  • Publish Date: 2022-03-30
  • Disks (e.g., compressor disk, turbine disk) are key components of aero-engine, which play an important role in flight safety. Over the past several decades, extensive studies have been carried out to study the modeling and detection methods of aero-engine disks with cracks. However, to the best of the authors’ knowledge, no comprehensive review has been reported yet to summarize the existing studies. In this paper, the dynamic models of disks with cracks are summarized firstly. Then, the crack detection methods are reviewed. Finally, the limitations and future trends are discussed, which can provide inspiration for future research.
  • loading
  • [1]
    . Yan H, Zhong PD, Xi NS, et al. A case study of cracks in aero-engine compressor discs. Engineering failure analysis 2000; 7(3): 181-188.
    . National Transportation Safety Board. Uncontained Engine Failure and Subsequent Fire American Airlines Flight 383, Boeing 767-323, N345AN, Chicago, Illinois, October 28, 2016. Report No.: NTSB/AAR-18/01. Washington, D.C.: NTSB, 2018.
    . Australian Transport Safety Bureau. In-flight uncontained engine failure and air turn-back, Boeing 767-219ER, ZK-NBC. Report No.: 200205780. Canberra: ATSB, 2004.
    . Lee HP. Fundamental frequencies of annular plates with internal cracks. Computers & Structures 1992; 43(6): 1085-1089.
    . Yuan J, Young PG, Dickinson SM. Natural frequencies of circular and annular plates with radial or circumferential cracks. Computers & Structures 1994; 53(2): 327-334.
    . Yuan J, Dickinson SM. On the vibration of annular, circular and sectorial plates with cut-outs or on partial supports. Computers & Structures 1996; 58(6): 1261-1264.
    . Lee HP. Fundamental frequencies of polar orthotropic annular plates with sectorial cutouts. Composite Structures 1992; 21(1): 9-13.
    . Nair NN, Hashemi HN, Warner GM. Effect of a circumferential arc crack on the vibration characteristics of a flexible spinning disk. ASME International Mechanical Engineering Congress and Exposition. 2007.p.2165-2173.
    . Bahaloo H, Papadopolus J, Ghosh R, et al. Transverse vibration and stability of a functionally graded rotating annular disk with a circumferential crack. International Journal of Mechanical Sciences 2016; 113: 26-35.
    . Derakhshan E, Fakhrzarei M, Derakhshan S. Analytical solution for free vibration of annular mindlin plate with a circumferential open crack. International Journal of Acoustics & Vibration, 2019, 24(3).
    . Tada H, Paris PC, Irwin GR. The stress analysis of cracks handbook. 1973.
    . Haase WC, Drumm MJ. Detection, discrimination and real-time tracking of cracks in rotating disks. Proceedings of IEEE Aerospace Conference. 2002.
    . Gyekenyesi AL, Sawicki JT, Haase WC. Modeling disk cracks in rotors by utilizing speed dependent eccentricity. Journal of Materials Engineering and Performance 2010; 19(2): 207-212.
    . Butz MG, Rodríguez HM. Propulsion health monitoring for enhanced safety. Report No.: NASA/CR-2003-212291. Niskayuna: GE Global Research, 2003.
    . Luo H, Rodriguez H, Hallman D, et al. Disk crack detection for seeded fault engine test. Report No.: NASA/CR-2004-213069. New York: GE Global Research, 2004.
    . Wang W. Disk crack detection and diagnosis for gas turbine engines. 2006 IEEE Aerospace Conference. 2006.
    . Wang W, Becker A. Crack detection for engine disks under spin testing. The Shock and Vibration Digest 2006; 38(6): 523-524.
    . Yang Y, Ma M, Zhou Z, et al. Dynamic model-based digital twin for crack detection of aero-engine disk. 2021 International Conference on Sensing, Measurement & Data Analytics in the era of Artificial Intelligence (ICSMD). 2021.p.1-6.
    . Zhao J, Cao HR. Modeling and vibration characteristics analysis of aero-engine disk crack for aero-engines. 2019 Asia Pacific Conference of the Prognostics and Health Management. 2019.
    . Demir A, Mermertaş V. A study on annular plates with radial through cracks by means of sector type element. Journal of Sound and Vibration 2007; 300(3-5): 466-478.
    . Demir A, Mermertaş V. Natural frequencies of annular plates with circumferential cracks by means of sector element. Engineering Fracture Mechanics 2008; 75(5): 1143-1155.
    . Abdul-Aziz A, Baaklini GY, Roth DJ. Applicability of a crack-detection system for use in rotor disk spin test experiments being evaluated. Cleveland: NASA Glenn Research Center, 2004.
    . Abdul-Aziz A, Trudell JJ, Baakilini GY. Finite element design study of a bladed, flat rotating disk to simulate cracking in a typical aero-engine disk. 2015 Nondestructive Evaluation and Health Monitoring of Aerospace Materials, Composites, and Civil Infrastructure IV. 2005.p.298-307.
    . Abdul-Aziz A, Woike MR, Abumeri G, et al. NDE using sensor based approach to propulsion health monitoring of a turbine engine disk. 2009 Health Monitoring of Structural and Biological Systems. 2009.
    . Abdul-Aziz A, Woike MR, Clem M, et al. Engine rotor health monitoring: An experimental approach to fault detection and durability assessment. 2015 Smart Sensor Phenomena, Technology, Networks, and Systems Integration. 2015.
    . Abdul-Aziz A, Woike MR, Clem M, et al. Turbine engine rotor health monitoring evaluation by means of finite element analyses and spin tests data. 2014 Smart Sensor Phenomena, Technology, Networks, and Systems Integration. 2014.
    . Abdul-Aziz A, Woike MR, Lekki JD, et al. Development of a flaw detection/health monitoring scheme for turbine engine rotating components. Atlanta: American Institute of Aeronautics and Astronautics Inc. 2010.
    . Bouboulas A, Anifantis N. Vibration analysis of a rotating disk with a crack. ISRN Mechanical Engineering 2011,2011(2): 727120.
    . Peng PF, Chiu YJ, Li XY. Research on coupling vibration of disk crack and shaft crack of rotor system based on finite element method. International Conference on Genetic and Evolutionary Computing. 2019.
    . Wang D, Cao HR, Zhang YY. Blade tip characteristics of aero-engine disks with cracks. Engineering Failure Analysis 2022; 133: 105960.
    . Ayhan AO. Stress intensity factors and equations for tangential surface cracks in rotating hollow disks. Theoretical and Applied Fracture Mechanics 2020; 108: 102633.
    . Ayhan AO. Stress intensity factor solutions and equations for radial surface cracks contained in rotating hollow disks. Theoretical and Applied Fracture Mechanics 2021; 112: 102828.
    . Wang R, Liu X, Hu D, et al. Zone-based reliability analysis on fatigue life of GH720Li aero-engine disk concerning uncertainty quantification. Aerospace Science and Technology 2017; 70: 300-309.
    . Hu D, Su X, Liu X, et al. Bayesian-based probabilistic fatigue crack growth evaluation combined with machine-learning-assisted GPR. Engineering Fracture Mechanics 2020; 229: 106933.
    . Yarullin RR, Zakharov AP, Ishtyriakov IS. Nonlinear fracture resistance parameters for cracked aircraft GTE compressor disk. Procedia Structural Integrity 2018; 13: 902-907.
    . Shlyannikov V, Zakharov A, Yarullin R. A plastic stress intensity factor approach to aero-engine disk structural integrity assessment. Frattura ed Integrità Strutturale 2016; 10(37): 193-199.
    . Giannella V, Perrella M, Shlyannikov VN. Fatigue crack growth in a compressor stage of a turbofan engine by FEM-DBEM approach. Procedia Structural Integrity 2018; 12: 404-415.
    . Giannella V, Citarella R, Perrella M, et al. Surface crack modelling in an engine compressor disc. Theoretical and Applied Fracture Mechanics 2019; 103: 102279.
    . Cartz L. Nondestructive testing. 1995.
    . Mix PE. Introduction to nondestructive testing: a training guide. 2005.
    . Zhao X, Zhang L. Finite element analysis of ultrasonic surface waves for crack detection on an engine rotor disk. Materials Evaluation 2008; 66(1).
    . Poudel A, Chu JS. Air-coupled ultrasonic testing of carbon-carbon composite aircraft brake disks. Materials Evaluation 2013; 71(8).
    . Xu Q, Wang H, Chen Z, et al. Detection of cracks in aerospace aero-engine disks using an ultrasonic phased array C-scan device. Structural Durability & Health Monitoring 2021; 15(1): 39-52.
    . Wronkowicz A, Dragan K, Lis K. Assessment of uncertainty in damage evaluation by ultrasonic testing of composite structures. Composite Structures 2018; 203: 71-84.
    . Kryukov II, Leont’ev SA, Platonov VS, et al. Testing of discs of turbine rotors of gas compressors with the dye penetrant nondestructive testing technique. Russian Journal of Nondestructive Testing 2008; 44(8): 542-547.
    . Kryukov II, Leont’ev SA, Platonov VS, et al. The experience of application of dye penetrant nondestructive testing in diagnostics of gas turbines. Gas Turbine Technologies 2006; 7: 10-12.
    . Migoun NP, Delenkovskii NV. Improvement of penetrant-testing methods. Journal of Engineering Physics and Thermophysics 2009; 82(4): 734-742.
    . Lovejoy D. Penetrant testing: A practical guide. London, New York: Chapman & Hall, 1991.
    . Graves B. Understanding your inspection–liquid penetrant [Internet]. American Testing Services Ltd. Available from: https://americantestingservices.com/understandi ng-inspection-liquid-penetrant/.
    . Eua-anant N, Cai X, Udpa L, et al. Crack detection in eddy current images of jet engine disks. AIP Conference Proceedings 2000; 509(1): 773-780.
    . Hamia R, Cordier C, Dolabdjian C. Eddy-current non-destructive testing system for the determination of crack orientation. NDT & E International 2014; 61: 24-28.
    . Kim D, Udpa L, Udpa S. Remote field eddy current testing for detection of stress corrosion cracks in gas transmission pipelines. Materials Letters 2004; 58(15): 2102-2104.
    . Mun HY, Kim CE. Comparison of ECT probes in diagnosis of defects. Journal of Electrical Engineering and Technology 2014; 9(1): 190-196.
    . Wolter B, Dobmann G, Fraunhofer I. Micromagnetic testing for rolled steel. European Conference on Non-destructive Testing. 2006.
    . Liu B, Ma Z, Liu Z, et al. Research on internal detection technology for axial crack of long-distance oil and gas pipeline based on micromagnetic method. Structural Health Monitoring 2020; 19(4): 1123-1136.
    . Li E, Kang Y, Tang J, et al. A new micro magnetic bridge probe in magnetic flux leakage for detecting micro-cracks. Journal of Nondestructive Evaluation 2018; 37(3): 1-9.
    . Ducharne B. 8-Micromagnetic nondestructive testing Barkhausen noise vs other techniques. Barkhausen Noise for Nondestructive Testing and Materials Characterization in Low-Carbon Steels. Woodhead Publishing, 2020.p.223-238.
    . Sonnichsen HE, Milatovic B. Detecting anomalies in rotating components. 2002.
    . Liu R, Yan R, Ma M, et al. Deep convolutional neural network for early disk crack diagnosis under variable speed. ASME International Mechanical Engineering Congress and Exposition. 2018.
    . Drumm M, Haase WC. High performance rotor monitoring. 19th Digital Avionics System Conference. 2000.
    . Haase WC, Roberge JK. Detection and characterization of blade/disk cracks in operational turbine engines. IEEE Aerospace Conference. 2003,7:3053-3060.
    . Von Flotow A. Apparatus and method for predicting failures of spinning disks in turbo-machinery, US10280320. 2004.
    . Von Flotow A, Tappert P, Mercadal M, et al. Low cycle fatigue rotor burst prognostics using blade tip sensors crack detection on aero-engine hardware. New Orleans: Minerals, Metals and Materials Society, 2005.p.209-216.
    . Wang WY, Muschlitz G. Disk crack detection in spin testing using tip timing data. 2010 IEEE Aerospace Conference. 2010.
    . Wang W. Spin test monitoring using blade tip timing measurement. Proceedings of the 14th Australian International Aerospace Congress/7th International Conference on Health & Usage Monitoring. 2011: 1-10.
    . Abdul-Aziz A, Woike M, Baaklini G, et al. Turbine engine disk rotor health monitoring assessment using spin tests data. Conference on Smart Sensor Phenomena, Technology, Networks, and Systems Integration. 2012.
    . Abdul-Aziz A, Woike M, Oza N, et al. Propulsion health monitoring of a turbine engine disk using spin test data. 2010 Conference on Health Monitoring of Structural and Biological Systems. 2010.
    . Abdul-Aziz A, Woike M, Lekki JD, et al. Health monitoring of a rotating disk using a combined analytical-experimental approach. Materials Evaluation 2010; 68(3): 353-359.
    . Woike M, Abdul-Aziz A, Bencic T. A microwave blade tip clearance sensor for propulsion health monitoring. AIAA Infotech@Aerospace 2010. 2010.
    . Woike M, Abdul-Aziz A. Crack-detection experiments on simulated turbine engine disks in NASA Glenn Research Center's Rotordynamics Laboratory. 48th Aerospace Science Meeting. 2010.
    . Abdul-Aziz A, Arble D, Woike M. Data collection and analysis software development for rotor dynamics testing in spin laboratory. Conference on Smart Materials and Nondestructive Evaluation for Energy Systems. 2017.
    . Chana K, Cardwell D, Gray L, et al. Disk crack detection and prognosis using non contact time of arrival sensors. Turbo Expo: Power for Land, Sea, and Air. 2011.
    . Martin RE, Gyekenyesi AL, Sawicki JT, et al. Structural damage assessment of propulsion system components by impedance based health monitoring. Conference on Advanced Sensor Technologies for Nondestructive Evaluation and Structual Health Monitoring. 2005.
    . Gyekenyesi AL, Haase WC. Rotor health monitoring by wireless localized sensing. ASME Turbo Expo 2010. 2010.
    . Woike M, Fralick G, Abdul-Aziz A, et al. Further investigation of a moire based crack detection technique on a simulated turbine engine disk. Report No.: GRC-E-DAA-TN5316. 2012.
    . Woike M, Abdul-Aziz A, Fralick GC, et al. Investigation of a moire based crack detection technique for propulsion health monitoring. Conference on Smart Sensor Phenomena, Technology, Networks, and Systems Integration. 2012.
    . Woike M, Abdul-Aziz A, Clem M, et al. Optical strain and crack-detection measurements on a rotating disk. Conference on Smart Sensor Phenomena, Technology, Networks, and Systems Integration. 2013.
    . Clem M, Woike M, Abdul-Aziz A. Progress of a cross-correlation based optical strain measurement technique for detecting radial growth on a rotating disk. Conference on Smart Sensor Phenomena, Technology, Networks, and Systems Integration. 2014.
  • 加载中


    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索


    Article Metrics

    Article views (3707) PDF downloads(137) Cited by()
    Proportional views


    DownLoad:  Full-Size Img  PowerPoint