Simulation and analysis of hydraulic driven faults in rotating airplane cabin doors

Zhiwei ZENG; Qiang MIAO

doi:10.51393/j.jamst.2023014

Volume 3 Issue 4

Sep. 2023

Turn off MathJax

Article Contents

Article Navigation > Journal of Advanced Manufacturing Science and Technology > 2023 > 3(4): 2023014

Zhiwei ZENG, Qiang MIAO. Simulation and analysis of hydraulic driven faults in rotating airplane cabin doors[J]. Journal of Advanced Manufacturing Science and Technology , 2023, 3(4): 2023014. doi: 10.51393/j.jamst.2023014

Citation:

Zhiwei ZENG, Qiang MIAO. Simulation and analysis of hydraulic driven faults in rotating airplane cabin doors[J]. Journal of Advanced Manufacturing Science and Technology , 2023, 3(4): 2023014. doi: 10.51393/j.jamst.2023014

Citation:

PDF( 9511 KB)

Simulation and analysis of hydraulic driven faults in rotating airplane cabin doors

doi: 10.51393/j.jamst.2023014

Zhiwei ZENG,
Qiang MIAO^,

College of Electrical Engineering, Sichuan University, Chengdu 610065, China

Received Date: 2023-05-28
Accepted Date: 2023-07-10
Rev Recd Date: 2023-06-17

Available Online: 2023-08-21

Publish Date: 2023-08-21

Abstract

Abstract

As one of the hydraulic control systems of an aircraft, the hydraulic drive system of the aircraft cabin door can cause severe impact on the safe operation of the plane once failed. In order to enhance the safety and reliability of the hydraulic drive system of the aircraft cabin door, this paper takes the rotary hydraulic drive system of the aircraft cabin door as the research object, and analyzes its working principle. Additionally, five types of potential failures are summarized, including gain reduction fault in angular displacement sensors, blockage fault in flow control valves, air pollution fault, leakage fault in motor plungers, and motor plunger failure fault. Using the AEMSim software to establish a fault simulation model, the fault characteristics of the system under various fault conditions can be studied, which can effectively reduce the cost of physical simulation and testing, improve design efficiency and provide simulation data for other research.
- Airplane cabin doors,
- Hydraulic system,
- AMESim,
- Fault simulation,
- Fault analysis

FullText(HTML)

References(21)

References

[1]	. Maré JC, Fu J. Review on signal-by-wire and power-by-wire actuation for more electric aircraft. Chinese Journal of Aeronautics 2017; 30(3): 857-870.
[2]	. Zhang C, Liu R, Tao C, et al. Design, construction, and modeling of aircraft door sealing plate based on SMAs. International Journal of Smart and Nano Materials 2022; 13(3): 481-503.
[3]	. Pappalardo CM, Manca AG, Guida D. A combined use of the multibody system approach and the finite element analysis for the structural redesign and the topology optimization of the latching component of an aircraft hatch door. IAENG International Journal of Applied Mathematics 2021; 51(1):175-191.
[4]	. Wang X, Cai Y, Geng X. Integrated optimization of composite bay door with pre-deformation and variable thickness design. Struct Multidisc Optim 2019;59: 1673-1684.
[5]	. Schmiedel P, Holzheimer M. Development of CFRP aircraft doors with the interaction of NDT and strength analysis. 19th World Conference on Nondestructive Testing. 2016.
[6]	. Tang J, Liu Q, Hu J, et al. Leakage fault diagnosis method of aircraft landing gear hydraulic cylinder based on wavelet packet. The Journal of Engineering 2019; (13): 427-431.
[7]	. Duan S, Li Y, Cao Y, et al. Health assessment of landing gear retraction/extension hydraulic system based on improved risk coefficient and FCE model. Applied Sciences 2022; 12(11): 5409.
[8]	. Zhou J, Yu L, Sun K, et al. Modeling and fault diagnosis of aviation hydraulic servo actuator. The Proceedings of the 2021 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2021). 2022.p.253-268.
[9]	. Ma Q, Song D, Liu B. Fault mode analysis and simulation verification of hydraulic system based on AMEsim. Journal of Physics: Conference Series 2021; 2006(1): 012013.
[10]	. Zhu S, Ge Z, Ma T, et al. Modeling and fault simulation of aircraft lock mechanism. 2022 Prognostics and Health Management Conference (PHM-2022 London). 2022.p.228-231.
[11]	. Guo WG, Han W. Modeling and faults simulation of aircraft landing gear system. Applied Mechanics and Materials. 2013, 333: 2021-2024.
[12]	. Ding X, Zhou J, Shi Z, et al. Fault simulation and experimental verification of axial piston pump based on AMEsim. 2021 Global Reliability and Prognostics and Health Management (PHM-Nanjing). 2021.p.1-6.
[13]	. Li X, Feng YF, He WH. An analysis and study on the control method for the rotating weapon bay door drive system. Hydraulic, Pneumatic, and Sealing Technology 2018;38(5): 45-48 [Chinese].
[14]	. Duan Q, Zhou S, Wan F, et al. Simulation analysis and fault simulation of aircraft landing gear retraction hydraulic system based on model. 2022 Global Reliability and Prognostics and Health Management (PHM-Yantai). 2022.p.1-6.
[15]	. Roccatello A, Manco S, Nervegna N. Modelling a variable displacement axial piston pump in a multibody simulation environment. Journal of Dynamic Systems Measurement & Control 2007;129(4):819-829.
[16]	. Yang L, Wang G, Nie S. Speed characteristics analysis and simulation of the water hydraulic axial piston motor. World Journal of Engineering 2016; 13(6): 524-528.
[17]	. Zhou YH, Qi XY. Co-simulation study on overrunning load balance in cabin door hydromechanical drive system. Advanced Materials Research. 2013, 765.p.392-397.
[18]	. Chen X, Wu S, Jiao Z. Research on dynamic torque performance of load simulator based on rotary electro-hydrostatic actuator. 2021.
[19]	. Zhou YH, Qi XY. Co-simulation study on overrunning load balance in cabin door hydromechanical drive system. Advanced Materials Research 2013; 765-767:392-397.
[20]	. Ali T, Hui L, Ze KW. Design and simulation of novel control architecture for the movement of commercial aircraft cabin door. 2019 16th International Computer Conference on Wavelet Active Media Technology and Information Processing. 2019.
[21]	. Feng YF. Power consumption analysis of a cabin door drive system based on a variable displacement hydraulic motor. Hydraulic, Pneumatic, and Sealing Technology 2020; 40(11): 43-46 [Chinese].